Buy Prvi Partizan Brass 7.5mm Schmidt-Rubin (7.5x55mm Swiss) Bag of 50
Buy Prvi Partizan Brass 7.5mm Schmidt-Rubin (7.5x55mm Swiss) Bag of 50. Prvi Partizan is offering a wide range of cartridge cases for hand loaders. These components use high quality raw materials. The cases are tested in a modern laboratory with stringent quality control during the entire production process. These characteristics will provide for the assembling of accurate and safe ammunition. The cartridge cases of PPU can be reloaded several times, without losing its quality. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
|Cartridge||7.5mm Schmidt Rubin (7.5 x 55 Swiss)|
|Shipping Weight||1.405 Pounds|